Hapuflam® fire protection mortar
for cable fire stops
| Classification | S90 according to DIN 4102 |
|---|---|
| Approval number | Z-19.15-1560 |
| Installation | square cable fire stops in solid walls and ceilings |
Product description
Hapuflam® fire protection mortar is a dry ready mortar containing all necessary binders and aggregates in its base mass. The consistency of the ready fire protection mortar can be moulded and therefore also inserted as a filler without casing.
Our Hauflam® fire protection mortar is particularly suited to wall and ceiling openings where the filler thickness is just 20 cm
Installation instructions
Before processing, the
Hapuflam® fire protection mortar only needs to be stirred with water to the known plastic consistency.
The prepared Hapuflam® fire protection mortar can be inserted by hand or, for larger recesses, using a mortar pump and lance.
The prepared Hapuflam® fire protection mortar can be inserted by hand or, for larger recesses, using a mortar pump and lance.
| Wall thicknesses | Max. filler size | Min. filler depth |
|---|---|---|
| Masonry > 100mm | 1200 x 2500 | 200 mm |
| Concrete /reinforced concrete > 100mm | 1200 x 2500 | 200 mm |
| Light partition wall > 100mm | 1200 x 2500 | 200 mm |
| Ceiling thicknesses | max. partition size | min. partition size |
|---|---|---|
| Concrete /reinforced concrete > 160mm | 1000 x ∞ | 200 mm |
Allocation
Cables, steel cable support constructions, aluminium or plastic pipes if the outer diameter is no more than 15 mm and it is wound with mineral wool at a length of at least 400 mm in the area of the cable fire stop.
Supply container
- Bucket with 12 kg contents of drying mortar
- Sack goods, contents approximately 20 kg of dry mortar
Mixing 20 kg of dry mortar with approximately 15 L of water results in a container of approximately 34 L of ready fire protection mortar.
Mix ratio for small quantities:
1.00 litre dry mortar
+ 0.37 litre water
= 0.82 litre wet mortar
